COVER PAGE 1 PAGE 2 PAGE3
SPECIFICATIONS:
Model No. DR-200N DR-100N DR-50N
Printing Method Thermal printing by thin-film thermal printing head
Kinds of printing Characters, Analog wave, Bit-image
Characters ANK Characters (Alphabet, Numbers)
  Script Characters (Alphabet, Numbers)
Size of characters ANK Characters approx. 2 x 2mm, pitch 2mm
  Script Characters approx. 2 x 1mm, pitch 2mm
Direction of characters Either horizontal or vertical
Character Numbers      
ANK Characters/line 100 (vertical) 50 (vertical) 27 (vertical)
  50 (horizontal) 26 (horizontal) 14 (horizontal)
Script Characters/line 100 50 27
Printing speed (approx.)      
ANK Characters 400 cps (16x18dot) 200 cps (16x18dot) 120 cps (16x18dot)
Script Characters 400 cps (16x9dot) 200 cps (16x9dot) 120 cps (16x9dot)
Analog output 50mm/s max.
Bit image 12.5mm/s max. 25 mm/s max. 50 mm/s max.
Analog Channel 1ch~4ch 1ch~3ch 1ch~2ch
Recording Paper      
Roll paper (width x length) 210mm x approx. 30m 114mm x approx. 25m 58mm x approx. 25m
(Chart No.) 21002TP297 11401T 05806T
Fold paper (width x length) 210mm x 297mm x 350 114mm x 150mm x 340  
(Chart No.) 21002TZ297 11401TZ150  
Actual printing width 204mm 102mm 54mm
Paper drive method   Sprolet less type Pulse motor  
Paper drive accuracy ±1%
Interface   8-bit parallel (centronics standard)  
Resolution 8 bits per mm
Total dot numbers 1728 dots 832 dots 448 dots
Service life of head Electrical: 30 million pulse Mechanical: 30km
Noise Less than 55 dB (measured at A characteristic from 1m distance)
Power Source 5V ± 5% 0.5A, 24V ± 10% 2A average
Ambient conditions Temperature: 5~40? Humidity: 20~80% RH
Storage conditions Temperature: -20~70? Humidity: 10~95% RH (But except thermal paper)
Outer dimension 280(w)x125(h)x90(d)mm 178(w)x125(h)x90(d)mm 124(w)x95(h)x128(d)mm
Weight (approx.) 2.2 kg 1.5kg 1kg
   
CALPAN CO., LTD.
DAIWA 2ND BLDG., 4-1-4, ITACHIBORI, NISHI-KU, OSAKA, 550-0012, JAPAN
TEL: 0081-6-6537-1800 FAX: 0081-6-6537-1810 Mail: international@calpan.co.jp